Dracyon considers the common weaknesses of air cannons, and explains how they can be overcome. Accepting widely held assumptions is a great hindrance to productivity. Breakthroughs often occur when assumptions are challenged. This is the case for air cannon technology. Many plants assume their air cannons are technologically advanced. The reality is that most air cannons were designed around the turn of the century and have experienced little progress since then. Not many people would consider a television designed in 2007 to be advanced.
A plant’s air cannons are also assumed to be effective. Yet most plants provide supplemental cleaning services, such as high-pressure water washing. If a lawn care service required regular supplementation, it would not be considered effective. A final assumption made is that air cannons are reliable. However, many air cannons are out of order and others require a steady stream of replacement parts. A car requiring the same amount of attention would not be driven. Dracyon challenged these assumptions and produced an air cannon that is truly advanced, effective, and reliable. This breakthrough enables plants to save money through reduced maintenance costs and increased productivity. Yesterday’s air cannon will not solve today’s challenges.
Advanced Technology
What makes a golf swing powerful? At first glance, some might say ‘arm strength’. Arm strength is important, but the torque generated by the midsection is far more important. Something similar has happened in the air cannon industry. When asked what the most important factor for air cannon cleaning is, many answer ‘peak force’. Like the golf swing analogy, peak force is important but another factor is far more important: momentum and kinetic energy.
The difference described above is crucial because it affects the design of air cannons. If peak force truly is the answer, the best air cannons will be determined by quick release valves. If momentum and kinetic energy are the answer, then the best air cannon will be defined by volume and nozzle design.
Volume
Volume is related to kinetic energy (KE=1/2mv2) and momentum (p=mv). When it comes to air cannons, the easiest way to increase volume is to increase the size of the reservoir tank. This is, perhaps, the most recognizable feature of Dracyon’s Big Blue air cannon. Many plants are supplied with 70 l or 150 l air cannons. By increasing the volume to 300 l, the Big Blue air cannon more than doubles and (nearly) triples the kinetic energy and momentum compared to its competitors. Without volume the cleaning area is limited.
Velocity
Velocity is also related to kinetic energy and momentum but with one important difference. Velocity is exponentially related to kinetic energy.
Figure 1. The Big Blue air cannon is noticeably larger than other designs.
A doubling of velocity will yield a quadrupling of kinetic energy. The best way to increase velocity is through the design of the nozzle. Air cannons have typically employed a fan jet nozzle designed to produce a wide blast of air over the greatest possible surface area. What it gains in wide surface area, it sacrifices in velocity. A wide blast will accomplish nothing if it does not have the power to move the material. In today’s plants, cleaning only 1 m in front of an air cannon is not enough.
Instead of focusing on surface area, Dracyon’s nozzle is designed to move material. Firstly, it is larger (6 in. versus 4 in.). The larger nozzle generates more air (or volume), therefore, cleans at the time of discharge. Secondly, it increases velocity by choking the outlet opening. This is similar to using a thumb to increase velocity from the garden hose. The result of these design features is simple. A large volume of air is discharged with very high velocity. A nozzle, in other words, that moves material.
Conclusion
With greater kinetic energy and velocity, the Big Blue air cannon moves more material than other air cannons. Plants can generate more cleaning power with fewer air cannons, as Table 1 illustrates. This technological advancement is a direct result of challenging the prevailing assumption that peak force was the most important factor for air cannon cleaning.
Effective cleaning
Poorly designed air cannons are the inevitable consequence of having low expectations. Many plants still believe that their air cannons are effective despite the need for regular manual cleaning services. On the one hand, this is reasonable; it would be unfair to expect small air cannons with fan jet nozzles to not require additional manual cleaning. However, this does not have to be accepted as the standard; an effective air cannon should remove the need for manual cleaning. Moreover, it is important to note that manual cleaning is a safety risk.
All air cannons will fail eventually. The key to reliability is to reduce premature failure as far as possible and provide online maintenance when needed. These objectives can be accomplished by doing the opposite of what is described above. A reliable air cannon must be:
- Installed at a safe distance from the process. By reducing exposure to the heat, premature failure is avoided.
- Installed in an upright position. By reducing process intrusion, the air cannon internals are protected from corrosion.
- Installed in an accessible location. By ensuring access, many small problems can be solved while online.
One of the best ways to ensure these objectives is through longer pipe runs as shown in Figure 3.
It does not matter how advanced an air cannon is if it is not working. The industry has accepted frequent replacement and spare parts for too long. With a few adjustments to installation practices, air cannons should be backed by a 10-year warranty and 3-year nozzle warranty. Dracyon is willing to stand by that guarantee because customers deserve better.
Proper expectations
What the industry needs most is raised expectations concerning air cannon technology. If a plant spends hours every week manually cleaning, their air cannon installation should be deemed ineffective. Air cannons should be judged by their ability to eliminate supplemental cleaning services.
All air cannons will fail eventually. The key to reliability is to reduce premature failure as far as possible and provide online maintenance when needed. These objectives can be accomplished by doing the opposite of what is described above. A reliable air cannon must be:
- Installed at a safe distance from the process. By reducing exposure to the heat, premature failure is avoided.
- Installed in an upright position. By reducing process intrusion, the air cannon internals are protected from corrosion.
- Installed in an accessible location. By ensuring access, many small problems can be solved while online.
One of the best ways to ensure these objectives is through longer pipe runs as shown in Figure 3.
It does not matter how advanced an air cannon is if it is not working. The industry has accepted frequent replacement and spare parts for too long. With a few adjustments to installation practices, air cannons should be backed by a 10-year warranty and 3-year nozzle warranty. Dracyon is willing to stand by that guarantee because customers deserve better.
Reliable Performance
Even if an air cannon is less effective, it is still better to have one than none at all. Sadly, many plants do not have any because the ones they have are not functioning. In other cases, plants must regularly purchase spare parts to keep their air cannons operational. The industry has accepted this standard for
too long. Just as expectations for performance should change so, too, must expectations for reliability.
Reasons for Failure
All air cannons will fail eventually. The key to reliability is to reduce premature failure as far as possible and provide online maintenance when needed. These objectives can be accomplished by doing the opposite of what is described above. A reliable air cannon must be:
- Installed at a safe distance from the process. By reducing exposure to the heat, premature failure is avoided.
- Installed in an upright position. By reducing process intrusion, the air cannon internals are protected from corrosion.
- Installed in an accessible location. By ensuring access, many small problems can be solved while online.
One of the best ways to ensure these objectives is through longer pipe runs as shown in Figure 3.
It does not matter how advanced an air cannon is if it is not working. The industry has accepted frequent replacement and spare parts for too long. With a few adjustments to installation practices, air cannons should be backed by a 10-year warranty and 3-year nozzle warranty. Dracyon is willing to stand by that guarantee because customers deserve better.
Reasons for Reliability
All air cannons will fail eventually. The key to reliability is to reduce premature failure as far as possible and provide online maintenance when needed. These objectives can be accomplished by doing the opposite of what is described above. A reliable air cannon must be:
- Installed at a safe distance from the process. By reducing exposure to the heat, premature failure is avoided.
- Installed in an upright position. By reducing process intrusion, the air cannon internals are protected from corrosion.
- Installed in an accessible location. By ensuring access, many small problems can be solved while online.
One of the best ways to ensure these objectives is through longer pipe runs as shown in Figure 3.
It does not matter how advanced an air cannon is if it is not working. The industry has accepted frequent replacement and spare parts for too long. With a few adjustments to installation practices, air cannons should be backed by a 10-year warranty and 3-year nozzle warranty. Dracyon is willing to stand by that guarantee because customers deserve better.
Conclusion
The old assumptions concerning air cannon technology have been weighed, measured, and found wanting. It is past the time for the industry to rethink what it means for an air cannon to be advanced, effective, and reliable. Through reduced maintenance and increased productivity, plants will save millions of dollars annually. Only today’s air cannon will solve today’s challenges.